Product Overview:
The SLD-800 heating model is a universal single sensor temperature controller with functions such as heating, fan, and independent control of lighting. The compressor protection delays curing for 2 minutes, and stops according to the curing ratio after sensor failure. Suitable for refrigeration industries such as heating cabinets, hot milk cabinets, and hot beverage cabinets.
Specifications and dimensions:
1. Front panel dimensions: length 76.5 x width 35 (millimeters)
2. Installation hole size: Length 71 x Width 29 (millimeters)
3. Overall dimensions: length 76.5 x width 35 x 78 (millimeters)
4. Sensor wire length: 2 meters (including probe length)
User settings:
In normal operation, short press the SET key and release it to enter the user settings and viewing mode. The digital display shows set, and use the up and down keys to switch. The digital display switches between set (set minimum temperature) and p02 (defrosting temperature). When displaying the code, press the SET key to enter the corresponding parameter settings. After entering the parameter settings, use the up and down keys to adjust the specific parameter values. After the adjustment is completed, short press the SET key to save the parameter values, and short press the shutdown key to exit the user settings.
System settings:
In normal operation, long press the SET button for more than 2 seconds and the digital display shows F01 to enter the system parameter settings. Use the up and down keys to switch parameter codes. When the parameter code is displayed, short press the SET button to enter the corresponding parameter settings. Use the up and down keys to adjust the corresponding parameter values. After setting the parameter values, short press the SET button to save the current modified values and exit to the parameter code interface. After all parameter settings are completed, short press the shutdown exit button to exit the system parameter settings and save the parameter values.
1. Power on/off:
In normal operation, long press the shutdown button for more than 3 seconds to shut down the system, all outputs are turned off, and the digital display shows off,; In the shutdown state, press and hold the shutdown button for more than 3 seconds to turn on the system and enter normal operation.
2. Heating:
If the storage temperature is less than or equal to (F01-F02), heating is turned on,
When the storage temperature is greater than or equal to (F01), heating is turned off.
3. Abnormal sensing line:
When there is an abnormality in the sensing line, the display screen will show E1. At this time, the refrigerator starts the setting mode: heating stops for 20 minutes, then runs for 40 minutes, and so on.